Fitness

Steven F. Udvar-Hazy Center: south hangar panorama, including Air France Concorde, De Havilland-Canada DHC-1A Chipmunk Pennzoil Special among others

A few nice Weight loss tips images I found:

Steven F. Udvar-Hazy Center: south hangar panorama, including Air France Concorde, De Havilland-Canada DHC-1A Chipmunk Pennzoil Special among others
Weight loss tips
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Concorde, Fox Alpha, Air France:

The first supersonic airliner to enter service, the Concorde flew thousands of passengers across the Atlantic at twice the speed of sound for over 25 years. Designed and built by Aérospatiale of France and the British Aviation Corporation, the graceful Concorde was a stunning technological achievement that could not overcome serious economic problems.

In 1976 Air France and British Airways jointly inaugurated Concorde service to destinations around the globe. Carrying up to 100 passengers in great comfort, the Concorde catered to first class passengers for whom speed was critical. It could cross the Atlantic in fewer than four hours – half the time of a conventional jet airliner. However its high operating costs resulted in very high fares that limited the number of passengers who could afford to fly it. These problems and a shrinking market eventually forced the reduction of service until all Concordes were retired in 2003.

In 1989, Air France signed a letter of agreement to donate a Concorde to the National Air and Space Museum upon the aircraft’s retirement. On June 12, 2003, Air France honored that agreement, donating Concorde F-BVFA to the Museum upon the completion of its last flight. This aircraft was the first Air France Concorde to open service to Rio de Janeiro, Washington, D.C., and New York and had flown 17,824 hours.

Gift of Air France.

Manufacturer:
Societe Nationale Industrielle Aerospatiale
British Aircraft Corporation

Dimensions:
Wingspan: 25.56 m (83 ft 10 in)
Length: 61.66 m (202 ft 3 in)
Height: 11.3 m (37 ft 1 in)
Weight, empty: 79,265 kg (174,750 lb)
Weight, gross: 181,435 kg (400,000 lb)
Top speed: 2,179 km/h (1350 mph)
Engine: Four Rolls-Royce/SNECMA Olympus 593 Mk 602, 17,259 kg (38,050 lb) thrust each
Manufacturer: Société Nationale Industrielle Aérospatiale, Paris, France, and British Aircraft Corporation, London, United Kingdom

Physical Description:
Aircaft Serial Number: 205. Including four (4) engines, bearing respectively the serial number: CBE066, CBE062, CBE086 and CBE085.
Also included, aircraft plaque: "AIR FRANCE Lorsque viendra le jour d’exposer Concorde dans un musee, la Smithsonian Institution a dores et deja choisi, pour le Musee de l’Air et de l’Espace de Washington, un appariel portant le couleurs d’Air France."

• • • • •

Quoting Smithsonian National Air and Space Museum | Press Release: National Air and Space Museum Receives Boeing S-307 Stratoliner for Display at Steven F. Udvar-Hazy Center, the Museum’s New Companion Facility at Dulles Airport:

The Smithsonian’s National Air and Space Museum welcomed today (Aug. 6) the sole surviving Boeing S-307 Stratoliner to its new home when the silver pioneering airliner arrived at Washington Dulles International Airport in Virginia for display at the museum’s new Steven F. Udvar-Hazy Center. The museum’s companion facility, adjacent to the airport, opens to the public Dec. 15.

The luxuriously appointed Stratoliner, built in the late 1930s, was the world’s first passenger airplane to be pressurized, allowing it to avoid rough weather by flying at unprecedented altitudes (20,000 feet) for transports of the era.

The airplane has been in the museum’s collection since 1972 but because of its size and weight could not be displayed at the museum’s flagship building on the National Mall. A team of volunteers and Boeing staff performed extensive restoration work on the airplane in Seattle.

"Visitors to the Udvar-Hazy Center will take one look at this airplane and be transported back to a glamorous age when the world became smaller for the traveler who required speed and luxury," said Gen. J.R. "Jack" Dailey, director of the National Air and Space Museum. "We are indebted to the Boeing restoration team for turning back the clock on this beautiful aircraft."

The Stratoliner arrived in Northern Virginia following an appearance at the Experimental Aircraft Association’s annual Fly-In at Oshkosh, Wisc. The airplane flew from Allegheny County Airport near Pittsburgh, where it landed August 5th because of bad weather.

With a wingspan of 107 feet and a cabin nearly 12 feet wide, the Clipper Flying Cloud will be exhibited at ground level in the Udvar-Hazy (pronounced OOD-var HAH-zee) Center aviation hangar.

[…]

The Clipper Flying Cloud was delivered to Pan American Airways with two others in 1940. The aircraft carried 33 passengers and a crew of five. The Pan American Airways airplane was reconfigured to seat 45 passengers. Stratoliners included space for berths for overnight travel; paneling in the cabin and lavatory; wall fabric featuring the Pan Am logo, world map and exotic animals; and eight divans.

The Clipper Flying Cloud began service flying Caribbean routes for two years. During World War II, it flew in South America under the direction of the U.S. Army Air Forces. In 1946, it made daily runs between New York and Bermuda. Throughout the next two decades it passed through the hands of several owners, and once served as a presidential plane for the notorious Haitian leader "Papa Doc" Duvalier. After its Haitian sojourn, the Clipper Flying Cloud landed in Arizona.

In 1969, a visiting National Air and Space Museum curator spotted the airplane in Arizona and immediately recognized its historic significance, even while its then-owner planned to convert it into a fire bomber. The Smithsonian subsequently acquired the aircraft and later made arrangements with the Boeing Company for the restoration, dubbed "Operation Flying Cloud," at the Seattle plant where the Stratoliner was originally built.

Boeing technicians and former Pan American employees voluntarily spent six years completely restoring the Stratoliner before it made an emergency landing in Elliott Bay in 2002. Since then, the restoration team has performed additional work so that visitors to the Udvar-Hazy Center will have the opportunity to view the aircraft as it looked the day it rolled off the assembly line more than 60 years ago.

• • • • •

Quoting Smithsonian National Air and Space Museum | De Havilland-Canada DHC-1A Chipmunk, Pennzoil Special:

De Havilland originally designed the Chipmunk after World War II as a primary trainer to replace the venerable Tiger Moth. Among the tens of thousands of pilots who trained in or flew the Chipmunk for pleasure was veteran aerobatic and movie pilot Art Scholl. He flew his Pennzoil Special at air shows throughout the 1970s and early ’80s, thrilling audiences with his skill and showmanship and proving that the design was a top-notch aerobatic aircraft.

Art Scholl purchased the DHC-1A in 1968. He modified it to a single-seat airplane with a shorter wingspan and larger vertical fin and rudder, and made other changes to improve its performance. Scholl was a three-time member of the U.S. Aerobatic Team, an air racer, and a movie and television stunt pilot. At air shows, he often flew with his dog Aileron on his shoulder or taxied with him standing on the wing.

Gift of the Estate of Arthur E. Scholl

Manufacturer:
De Havilland Canada Ltd.

Pilot:
Art Scholl

Date:
1946

Country of Origin:
United States of America

Dimensions:
Wingspan: 9.4 m (31 ft)
Length: 7.9 m (26 ft)
Height: 2.1 m (7 ft 1 in)
Weight, empty: 717 kg (1,583 lb)
Weight, gross: 906 kg (2,000 lb)
Top speed: 265 km/h (165 mph)
Engine: Lycoming GO-435, 260 hp

Materials:
Overall: Aluminum Monocoque Physical Description:Single-engine monoplane. Lycoming GO-435, 260 hp engine.

Steven F. Udvar-Hazy Center: Boeing 367-80 (prototype 707, first jet airliner), and De Havilland Canada DHC-1A Chipmunk Pennzoil Special
Weight loss tips
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | De Havilland-Canada DHC-1A Chipmunk, Pennzoil Special:

De Havilland originally designed the Chipmunk after World War II as a primary trainer to replace the venerable Tiger Moth. Among the tens of thousands of pilots who trained in or flew the Chipmunk for pleasure was veteran aerobatic and movie pilot Art Scholl. He flew his Pennzoil Special at air shows throughout the 1970s and early ’80s, thrilling audiences with his skill and showmanship and proving that the design was a top-notch aerobatic aircraft.

Art Scholl purchased the DHC-1A in 1968. He modified it to a single-seat airplane with a shorter wingspan and larger vertical fin and rudder, and made other changes to improve its performance. Scholl was a three-time member of the U.S. Aerobatic Team, an air racer, and a movie and television stunt pilot. At air shows, he often flew with his dog Aileron on his shoulder or taxied with him standing on the wing.

Gift of the Estate of Arthur E. Scholl

Manufacturer:
De Havilland Canada Ltd.

Pilot:
Art Scholl

Date:
1946

Country of Origin:
United States of America

Dimensions:
Wingspan: 9.4 m (31 ft)
Length: 7.9 m (26 ft)
Height: 2.1 m (7 ft 1 in)
Weight, empty: 717 kg (1,583 lb)
Weight, gross: 906 kg (2,000 lb)
Top speed: 265 km/h (165 mph)
Engine: Lycoming GO-435, 260 hp

Materials:
Overall: Aluminum Monocoque Physical Description:Single-engine monoplane. Lycoming GO-435, 260 hp engine.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing 367-80 Jet Transport:

On July 15, 1954, a graceful, swept-winged aircraft, bedecked in brown and yellow paint and powered by four revolutionary new engines first took to the sky above Seattle. Built by the Boeing Aircraft Company, the 367-80, better known as the Dash 80, would come to revolutionize commercial air transportation when its developed version entered service as the famous Boeing 707, America’s first jet airliner.

In the early 1950s, Boeing had begun to study the possibility of creating a jet-powered military transport and tanker to complement the new generation of Boeing jet bombers entering service with the U.S. Air Force. When the Air Force showed no interest, Boeing invested million of its own capital to build a prototype jet transport in a daring gamble that the airlines and the Air Force would buy it once the aircraft had flown and proven itself. As Boeing had done with the B-17, it risked the company on one roll of the dice and won.

Boeing engineers had initially based the jet transport on studies of improved designs of the Model 367, better known to the public as the C-97 piston-engined transport and aerial tanker. By the time Boeing progressed to the 80th iteration, the design bore no resemblance to the C-97 but, for security reasons, Boeing decided to let the jet project be known as the 367-80.

Work proceeded quickly after the formal start of the project on May 20, 1952. The 367-80 mated a large cabin based on the dimensions of the C-97 with the 35-degree swept-wing design based on the wings of the B-47 and B-52 but considerably stiffer and incorporating a pronounced dihedral. The wings were mounted low on the fuselage and incorporated high-speed and low-speed ailerons as well as a sophisticated flap and spoiler system. Four Pratt & Whitney JT3 turbojet engines, each producing 10,000 pounds of thrust, were mounted on struts beneath the wings.

Upon the Dash 80’s first flight on July 15, 1954, (the 34th anniversary of the founding of the Boeing Company) Boeing clearly had a winner. Flying 100 miles per hour faster than the de Havilland Comet and significantly larger, the new Boeing had a maximum range of more than 3,500 miles. As hoped, the Air Force bought 29 examples of the design as a tanker/transport after they convinced Boeing to widen the design by 12 inches. Satisfied, the Air Force designated it the KC-135A. A total of 732 KC-135s were built.

Quickly Boeing turned its attention to selling the airline industry on this new jet transport. Clearly the industry was impressed with the capabilities of the prototype 707 but never more so than at the Gold Cup hydroplane races held on Lake Washington in Seattle, in August 1955. During the festivities surrounding this event, Boeing had gathered many airline representatives to enjoy the competition and witness a fly past of the new Dash 80. To the audience’s intense delight and Boeing’s profound shock, test pilot Alvin "Tex" Johnston barrel-rolled the Dash 80 over the lake in full view of thousands of astonished spectators. Johnston vividly displayed the superior strength and performance of this new jet, readily convincing the airline industry to buy this new airliner.

In searching for a market, Boeing found a ready customer in Pan American Airway’s president Juan Trippe. Trippe had been spending much of his time searching for a suitable jet airliner to enable his pioneering company to maintain its leadership in international air travel. Working with Boeing, Trippe overcame Boeing’s resistance to widening the Dash-80 design, now known as the 707, to seat six passengers in each seat row rather than five. Trippe did so by placing an order with Boeing for 20 707s but also ordering 25 of Douglas’s competing DC-8, which had yet to fly but could accommodate six-abreast seating. At Pan Am’s insistence, the 707 was made four inches wider than the Dash 80 so that it could carry 160 passengers six-abreast. The wider fuselage developed for the 707 became the standard design for all of Boeing’s subsequent narrow-body airliners.

Although the British de Havilland D.H. 106 Comet and the Soviet Tupolev Tu-104 entered service earlier, the Boeing 707 and Douglas DC-8 were bigger, faster, had greater range, and were more profitable to fly. In October 1958 Pan American ushered the jet age into the United States when it opened international service with the Boeing 707 in October 1958. National Airlines inaugurated domestic jet service two months later using a 707-120 borrowed from Pan Am. American Airlines flew the first domestic 707 jet service with its own aircraft in January 1959. American set a new speed mark when it opened the first regularly-scheduled transcontinental jet service in 1959. Subsequent nonstop flights between New York and San Francisco took only 5 hours – 3 hours less than by the piston-engine DC-7. The one-way fare, including a surcharge for jet service, was 5.50, or 1 round trip. The flight was almost 40 percent faster and almost 25 percent cheaper than flying by piston-engine airliners. The consequent surge of traffic demand was substantial.

The 707 was originally designed for transcontinental or one-stop transatlantic range. But modified with extra fuel tanks and more efficient turbofan engines, the 707-300 Intercontinental series aircraft could fly nonstop across the Atlantic with full payload under any conditions. Boeing built 855 707s, of which 725 were bought by airlines worldwide.

Having launched the Boeing Company into the commercial jet age, the Dash 80 soldiered on as a highly successful experimental aircraft. Until its retirement in 1972, the Dash 80 tested numerous advanced systems, many of which were incorporated into later generations of jet transports. At one point, the Dash 80 carried three different engine types in its four nacelles. Serving as a test bed for the new 727, the Dash 80 was briefly equipped with a fifth engine mounted on the rear fuselage. Engineers also modified the wing in planform and contour to study the effects of different airfoil shapes. Numerous flap configurations were also fitted including a highly sophisticated system of "blown" flaps which redirected engine exhaust over the flaps to increase lift at low speeds. Fin height and horizontal stabilizer width was later increased and at one point, a special multiple wheel low pressure landing gear was fitted to test the feasibility of operating future heavy military transports from unprepared landing fields.

After a long and distinguished career, the Boeing 367-80 was finally retired and donated to the Smithsonian in 1972. At present, the aircraft is installated at the National Air and Space Museum’s new facility at Washington Dulles International Airport.

Gift of the Boeing Company

Manufacturer:
Boeing Aircraft Co.

Date:
1954

Country of Origin:
United States of America

Dimensions:
Height 19′ 2": Length 73′ 10": Wing Span 129′ 8": Weight 33,279 lbs.

Physical Description:
Prototype Boeing 707; yellow and brown.

Steven F. Udvar-Hazy Center: south hangar panorama, including Air France Concorde, Boeing 307 Stratoliner “Clipper Flying Cloud”, De Havilland-Canada DHC-1A Chipmunk Pennzoil Special, Monocoupe 110 Special among others
Weight loss tips
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Monocoupe 110 Special:

Air show pilot and aerobatic champion W. W. "Woody" Edmondson thrilled audiences with his Monocoupe 110 Special throughout the 1940s. Edmondson, who named the airplane Little Butch for its bulldog-like appearance, placed second to "Bevo" Howard and his Bücker Jungmeister in the 1946 and ’47 American Aerobatic Championships, but he won the first International Aerobatic Championship in 1948.

The Monocoupe 110 Special was a clipped-wing version of the 110, part of a line that began with Don Luscombe’s Mono 22 and continued with the 70, 90, and 110 models. The sport coupes of the 1930s, these fast and maneuverable aircraft were ideal for racers Phoebe Omlie and Johnny Livingston. Ken Hyde of Warrenton, Virginia, restored Little Butch prior to its donation to the Smithsonian.

Gift of John J. McCulloch

Manufacturer:
Monocoupe Airplane Co.

Date:
1941

Country of Origin:
United States of America

Dimensions:
Wingspan: 6.9 m (23 ft.)
Length: 6.2 m (20 ft. 4 in.)
Height: 2.1 m (6 ft. 11 in.)
Weight, empty: 449 kg (991 lbs.)
Weight, gross: 730 kg (1,611 lbs.)
Top speed: 313 km/h (195 mph)
Engine: Warner 185, 200 hp

Materials:
Fuselage: steel tube with fabric cover

Physical Description:
High-wing, 2-seat, 1940’s monoplane. Warner Super Scarab 185, 200hp engine. Red with white trim. Clipped wings.

• • • • •

Quoting Smithsonian National Air and Space Museum | De Havilland-Canada DHC-1A Chipmunk, Pennzoil Special:

De Havilland originally designed the Chipmunk after World War II as a primary trainer to replace the venerable Tiger Moth. Among the tens of thousands of pilots who trained in or flew the Chipmunk for pleasure was veteran aerobatic and movie pilot Art Scholl. He flew his Pennzoil Special at air shows throughout the 1970s and early ’80s, thrilling audiences with his skill and showmanship and proving that the design was a top-notch aerobatic aircraft.

Art Scholl purchased the DHC-1A in 1968. He modified it to a single-seat airplane with a shorter wingspan and larger vertical fin and rudder, and made other changes to improve its performance. Scholl was a three-time member of the U.S. Aerobatic Team, an air racer, and a movie and television stunt pilot. At air shows, he often flew with his dog Aileron on his shoulder or taxied with him standing on the wing.

Gift of the Estate of Arthur E. Scholl

Manufacturer:
De Havilland Canada Ltd.

Pilot:
Art Scholl

Date:
1946

Country of Origin:
United States of America

Dimensions:
Wingspan: 9.4 m (31 ft)
Length: 7.9 m (26 ft)
Height: 2.1 m (7 ft 1 in)
Weight, empty: 717 kg (1,583 lb)
Weight, gross: 906 kg (2,000 lb)
Top speed: 265 km/h (165 mph)
Engine: Lycoming GO-435, 260 hp

Materials:
Overall: Aluminum Monocoque Physical Description:Single-engine monoplane. Lycoming GO-435, 260 hp engine.

• • • • •

Quoting Smithsonian National Air and Space Museum | Press Release: National Air and Space Museum Receives Boeing S-307 Stratoliner for Display at Steven F. Udvar-Hazy Center, the Museum’s New Companion Facility at Dulles Airport:

The Smithsonian’s National Air and Space Museum welcomed today (Aug. 6) the sole surviving Boeing S-307 Stratoliner to its new home when the silver pioneering airliner arrived at Washington Dulles International Airport in Virginia for display at the museum’s new Steven F. Udvar-Hazy Center. The museum’s companion facility, adjacent to the airport, opens to the public Dec. 15.

The luxuriously appointed Stratoliner, built in the late 1930s, was the world’s first passenger airplane to be pressurized, allowing it to avoid rough weather by flying at unprecedented altitudes (20,000 feet) for transports of the era.

The airplane has been in the museum’s collection since 1972 but because of its size and weight could not be displayed at the museum’s flagship building on the National Mall. A team of volunteers and Boeing staff performed extensive restoration work on the airplane in Seattle.

"Visitors to the Udvar-Hazy Center will take one look at this airplane and be transported back to a glamorous age when the world became smaller for the traveler who required speed and luxury," said Gen. J.R. "Jack" Dailey, director of the National Air and Space Museum. "We are indebted to the Boeing restoration team for turning back the clock on this beautiful aircraft."

The Stratoliner arrived in Northern Virginia following an appearance at the Experimental Aircraft Association’s annual Fly-In at Oshkosh, Wisc. The airplane flew from Allegheny County Airport near Pittsburgh, where it landed August 5th because of bad weather.

With a wingspan of 107 feet and a cabin nearly 12 feet wide, the Clipper Flying Cloud will be exhibited at ground level in the Udvar-Hazy (pronounced OOD-var HAH-zee) Center aviation hangar.

[…]

The Clipper Flying Cloud was delivered to Pan American Airways with two others in 1940. The aircraft carried 33 passengers and a crew of five. The Pan American Airways airplane was reconfigured to seat 45 passengers. Stratoliners included space for berths for overnight travel; paneling in the cabin and lavatory; wall fabric featuring the Pan Am logo, world map and exotic animals; and eight divans.

The Clipper Flying Cloud began service flying Caribbean routes for two years. During World War II, it flew in South America under the direction of the U.S. Army Air Forces. In 1946, it made daily runs between New York and Bermuda. Throughout the next two decades it passed through the hands of several owners, and once served as a presidential plane for the notorious Haitian leader "Papa Doc" Duvalier. After its Haitian sojourn, the Clipper Flying Cloud landed in Arizona.

In 1969, a visiting National Air and Space Museum curator spotted the airplane in Arizona and immediately recognized its historic significance, even while its then-owner planned to convert it into a fire bomber. The Smithsonian subsequently acquired the aircraft and later made arrangements with the Boeing Company for the restoration, dubbed "Operation Flying Cloud," at the Seattle plant where the Stratoliner was originally built.

Boeing technicians and former Pan American employees voluntarily spent six years completely restoring the Stratoliner before it made an emergency landing in Elliott Bay in 2002. Since then, the restoration team has performed additional work so that visitors to the Udvar-Hazy Center will have the opportunity to view the aircraft as it looked the day it rolled off the assembly line more than 60 years ago.

• • • • •

Quoting Smithsonian National Air and Space Museum | Concorde, Fox Alpha, Air France:

The first supersonic airliner to enter service, the Concorde flew thousands of passengers across the Atlantic at twice the speed of sound for over 25 years. Designed and built by Aérospatiale of France and the British Aviation Corporation, the graceful Concorde was a stunning technological achievement that could not overcome serious economic problems.

In 1976 Air France and British Airways jointly inaugurated Concorde service to destinations around the globe. Carrying up to 100 passengers in great comfort, the Concorde catered to first class passengers for whom speed was critical. It could cross the Atlantic in fewer than four hours – half the time of a conventional jet airliner. However its high operating costs resulted in very high fares that limited the number of passengers who could afford to fly it. These problems and a shrinking market eventually forced the reduction of service until all Concordes were retired in 2003.

In 1989, Air France signed a letter of agreement to donate a Concorde to the National Air and Space Museum upon the aircraft’s retirement. On June 12, 2003, Air France honored that agreement, donating Concorde F-BVFA to the Museum upon the completion of its last flight. This aircraft was the first Air France Concorde to open service to Rio de Janeiro, Washington, D.C., and New York and had flown 17,824 hours.

Gift of Air France.

Manufacturer:
Societe Nationale Industrielle Aerospatiale
British Aircraft Corporation

Dimensions:
Wingspan: 25.56 m (83 ft 10 in)
Length: 61.66 m (202 ft 3 in)
Height: 11.3 m (37 ft 1 in)
Weight, empty: 79,265 kg (174,750 lb)
Weight, gross: 181,435 kg (400,000 lb)
Top speed: 2,179 km/h (1350 mph)
Engine: Four Rolls-Royce/SNECMA Olympus 593 Mk 602, 17,259 kg (38,050 lb) thrust each
Manufacturer: Société Nationale Industrielle Aérospatiale, Paris, France, and British Aircraft Corporation, London, United Kingdom

Physical Description:
Aircaft Serial Number: 205. Including four (4) engines, bearing respectively the serial number: CBE066, CBE062, CBE086 and CBE085.
Also included, aircraft plaque: "AIR FRANCE Lorsque viendra le jour d’exposer Concorde dans un musee, la Smithsonian Institution a dores et deja choisi, pour le Musee de l’Air et de l’Espace de Washington, un appariel portant le couleurs d’Air France."

Steven F. Udvar-Hazy Center: Profile view of the SR-71 Blackbird, F-4 Corsair, Peashooter, among others
Weight loss tips
Image by Chris Devers
Quoting Smithsonian National Air and Space Museum | Lockheed SR-71 Blackbird:

No reconnaissance aircraft in history has operated globally in more hostile airspace or with such complete impunity than the SR-71, the world’s fastest jet-propelled aircraft. The Blackbird’s performance and operational achievements placed it at the pinnacle of aviation technology developments during the Cold War.

This Blackbird accrued about 2,800 hours of flight time during 24 years of active service with the U.S. Air Force. On its last flight, March 6, 1990, Lt. Col. Ed Yielding and Lt. Col. Joseph Vida set a speed record by flying from Los Angeles to Washington, D.C., in 1 hour, 4 minutes, and 20 seconds, averaging 3,418 kilometers (2,124 miles) per hour. At the flight’s conclusion, they landed at Washington-Dulles International Airport and turned the airplane over to the Smithsonian.

Transferred from the United States Air Force.

Manufacturer:
Lockheed Aircraft Corporation

Designer:
Clarence L. "Kelly" Johnson

Date:
1964

Country of Origin:
United States of America

Dimensions:
Overall: 18ft 5 15/16in. x 55ft 7in. x 107ft 5in., 169998.5lb. (5.638m x 16.942m x 32.741m, 77110.8kg)
Other: 18ft 5 15/16in. x 107ft 5in. x 55ft 7in. (5.638m x 32.741m x 16.942m)

Materials:
Titanium

Physical Description:
Twin-engine, two-seat, supersonic strategic reconnaissance aircraft; airframe constructed largley of titanium and its alloys; vertical tail fins are constructed of a composite (laminated plastic-type material) to reduce radar cross-section; Pratt and Whitney J58 (JT11D-20B) turbojet engines feature large inlet shock cones.

• • • • •

Quoting Smithsonian National Air and Space Museum | Boeing P-26A Peashooter :

The Boeing P-26A of the mid-to-late 1930s introduced the concept of the high-performance, all-metal monoplane fighter design, which would become standard during World War II. A radical departure from wood-and-fabric biplanes, the Peashooter nonetheless retained an open cockpit, fixed landing gear, and external wing bracing.

Most P-26As stationed overseas were eventually sold to the Philippines or assigned to the Panama Canal Department Air Force, a branch of the U.S. Army Air Corps. Several went to China and one to Spain. This one was based at Selfridge Field in Michigan and Fairfield Air Depot in Ohio between its acceptance by the U.S. Army Air Corps in 1934 and its transfer to the Canal Zone in 1938. It was given to Guatemala in 1942 and flew in the Guatemalan air force until 1954. Guatemala donated it to the Smithsonian in 1957.

Gift of the Guatemalan Air Force, Republic of Guatemala

Manufacturer:
Boeing Aircraft Co.

Date:
1934

Country of Origin:
United States of America

Dimensions:
Wingspan: 8.5 m (27 ft 11 in)
Length:7.3 m (23 ft 11 in)
Height:3.1 m (10 ft 2 in)
Weight, empty:996 kg (2,196 lb)
Weight, gross:1,334 kg (2,935 lb)
Top speed:377 km/h (234 mph)
Engine:Pratt & Whitney R-1340-27, 600 hp
Armament:two .30 cal. M2 Browning aircraft machine guns

• • • • •

Quoting Smithsonian National Air and Space Museum | Vought F4U-1D Corsair :

By V-J Day, September 2, 1945, Corsair pilots had amassed an 11:1 kill ratio against enemy aircraft. The aircraft’s distinctive inverted gull-wing design allowed ground clearance for the huge, three-bladed Hamilton Standard Hydromatic propeller, which spanned more than 4 meters (13 feet). The Pratt and Whitney R-2800 radial engine and Hydromatic propeller was the largest and one of the most powerful engine-propeller combinations ever flown on a fighter aircraft.

Charles Lindbergh flew bombing missions in a Corsair with Marine Air Group 31 against Japanese strongholds in the Pacific in 1944. This airplane is painted in the colors and markings of the Corsair Sun Setter, a Marine close-support fighter assigned to the USS Essex in July 1944.

Transferred from the United States Navy.

Manufacturer:
Vought Aircraft Company

Date:
1940

Country of Origin:
United States of America

Dimensions:
Overall: 460 x 1020cm, 4037kg, 1250cm (15ft 1 1/8in. x 33ft 5 9/16in., 8900lb., 41ft 1/8in.)

Materials:
All metal with fabric-covered wings behind the main spar.

Physical Description:
R-2800 radial air-cooled engine with 1,850 horsepower, turned a three-blade Hamilton Standard Hydromatic propeller with solid aluminum blades spanning 13 feet 1 inch; wing bent gull-shaped on both sides of the fuselage.

Leave a Comment

You may also like